Zhangzhou Yijiaming Optoelectronic Technology Co., Ltd.
Main products:led light,led spot light,head lamp
Contact Us
  • Contact Person : Mr. Huang Yanwen
  • Company Name : Zhangzhou Yijiaming Optoelectronic Technology Co., Ltd.
  • Tel : 0086-596-6169323
  • Fax : 0086-596-2655130
  • Address : Fujian,Zhangzhou,Keneng Science &Technology Park, Lantian Industrial Zone, Longwen District
  • Country/Region : China
  • Zip : 363005

LED Strong Torch

LED Strong Torch
Product Detailed
Power Supply:Rechargeable lithium-ion battery Light source:1W high-power CREE LED Used for Camping

Rechargeable 1W LED Flashlight

Power supply: Rechargeable lithium-ion battery, the capacity is 2500mAh,

Light source:1W high-power CREE LED

Illumination bright light::Super bright: 120 lumens

Material: Aerospace aluminum

Treatment: Hard Anodizing- Titanium Black

Lens materials:Imported UCL lens

Continuous Illumination:Strong light can continuous illumination about 3 hours, and the weak light can continuous illumination more than 10 hours.

Size: Length: 164mm, Width: 25mm, Head diameter: 35mm


(1)It has five steps, with Strong light /a little bright light/ Weak light / Strobe light/ SOS,five switches functions;

(2) Aggressive design, anti-roll, waterproof structure;

(3) Straight rechargeable flashlight with auto light control, convenient and clean;

(4)with protection circuit of rechargeable NT18650 battery to prevent overcharge and over discharge caused damage.

2.How to use:

(1)Battery Installation Unscrew the end cap, pay attention to the battery positive and negative, put NT18650 battery into it, and then screw on the tail cover.

(2)Turn On When the Torch light is off, press the front touch switch, heard a gentle sound show that the torch light turn on.

(3) Strong light /a little bright light/ Weak light / Strobe light/ SOS When the torch is turn on full light, is the half-pressing the pre-touch light switches; repeat the above action is the explosive flash and close.

3.How to charge

For your convenience, please charge the NT18650 battery in the correct way as follows: When the brightness decreased, please use the configuration charger of the lamp to charge. First, put the lithium battery into the charger, and then insert the plug of the charger to 110-220V electricity, when the corresponding indicator light of the charger change from red to green said that the battery is full, you can remove the charger to stop charging. Charging time is about 4 hours.

Note: NT18650 single battery charging time is about 4 hours

LED Strong Torch

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.